饰面处理
Decoration Surface Processing
在进行板面装饰前的处理
Before the process of board decoration
1、检查板材安装是否按工程设计图纸和有关规定进行安装,墙体或吊顶的质量应按《装饰工程施工验收规范》进行验收。
1. To check the panel installation of project design drawings, the installation provisions, the quality of the wall or ceiling, and whether they are in accordance with "Decorated Construction Regulations".
2、板材检查完毕后可进行接缝处理。
2. Process with seaming procedure after the check of the board materials.
3、在装饰前须保证板面干燥、清洁、没有粉末及油迹。
3. To ensure there is no moisture, dust, powder or besmirch before decoration.
4、为提高板材的耐久性和稳固性,当产品用于潮湿区域时,建议在板面先涂一层耐碱防水的底涂料(如防水剂、硝基清漆、底层密着剂),这对保持饰面的使用效果及耐久性是非常重要的,且可减少涂料或粘胶的用量。
5、如板材处于较差的环境下使用,例如:办的两表面处于较大的温差及湿差情况下,为使板材使用效果更好,当一面涂上处理层时,另一面也应涂上相同的材料。
4. In order to improve the board's durability and stability, when in wet areas, a coat of bottom paint with alkaline water (such as waterproofing agent, nitro varnish, bottom adhesion agent) should be put on the surface. This will maintain the effectiveness and durability and reduce the amount of painting material or glue.
5, When in poor environment, for instance, when the temperature difference between two surfaces is large, both sides should be coated with processing layer for the cause of effectiveness.
表面装饰
Surface Decoration
- 涂料:选择涂料时,涂料性能应适用于增强纤维水泥制品,如丙烯酸或环氧系列涂料。当对板面的平滑度,光洁度要求较高,在装饰之前可先对板面进行全面抹灰,再用打磨机砂光,然后进行涂饰面处理。
- 贴墙纸或墙布:一种最简单实用的墙面或吊顶方式。粘贴材料主要为白乳胶、聚乙烯等水溶性粘胶。
- 贴饰面板(如薄木片、防火板、PVC薄板、铝塑板等):一种简便的装饰方式。粘贴材料可用白乳胶,立时得之类的万能胶、高级玻璃胶、结构胶、云石胶等。
- 贴瓷砖:建议采用专用的瓷砖胶。
- 粘帖大理石:用云石胶或卓能、德高、汉高等牌子的强力抗下坠型粘胶进行粘帖。一般建议粘帖大理石墙裙,厚度不宜大于20mm。
1. Painting: When choosing paint material, it should be taken into consideration that the paint should be applied to enhance the performance of fiber cement products, such as acrylic or epoxy paint series. There is a strict requirement toward the smoothness of the plate surface. Before decoration process begins, the board should be sanded with sanding machine and then grinded completely.
2. Wallpaper or Wall covering: The most simple and practical way of wall or ceiling. Pasting material is white latex, polyethylene and water-soluble glue.
3. Decorating panel (such as veneer sheets, fire board, PVC sheet, aluminum plate, etc.): A simple way of decoration. Pasting material can be white emulsion, adhesive glue, high glass adhesive, structural adhesive, marble glue, etc.
4. Tiling: Ceramic tile adhesive has been recommended as the pasting material.
5.Pasting marble: The pasting material should be powerful anti-fall-type adhesive pastes, naming Cheuk Nang, DeGao, and Hangao, etc. Generally, the thickness should be of no more than 20mm.
|